Based on the plug-in piston pump, the threaded oil port piston pump reduces the usage ability of rotate speed , and adopts the traditional oil port threaded connection.

This is a better choice for customers who do not want to have a valve block, do not need high-speed operation, or want the cost to be as low as possible.

Thread Ports Piston Pump

Specifications

Displacement(cc)	0.03	0.06	0.09/0.13	0.25	0.5	1		1.5	1.75
Thread ports	●	●	●	●	●	●		●	●
Weight(kg)	0.15			0.39		0.74
Mark: ● already have ○ is developing
Peak pressure(Mpa)	35	35	35	35	35	35		35	30
Rated pressure(Mpa)	30	30	30	30	30	30		30	25
Max. speed	3000	3000	3000	3000	3000	4000		4000	3000
Rotation	clockwise			Bi-directional
Max. speed is tested with 46# at 40℃(46cSt. For different oil, temperature or flow passage section pls contact us for details
Min. Con. Speed (RPM)	300	300	300	300	300	300		300	300
keep 21MPa speed (RPM)	400	200	100	100	50	50		50	50
keep 21MPa speed (RPM)	Please note: the minimum speed of standard products under 20MPa is 100RPM. If it is necessary to maintain pressure at a lower speed, please select and communicate the requirements as needed at the time of purchase.
Oil temperature (℃)	-40~+100℃
Recommend Oil	46,68# anti wear hydraulic oil(DTE24,25,Aviation hydraulic oils 10 and 15 can be used.
Recommended fluid cleanliness	ISO4406 20/17/14(NAS 8)						ISO440621/18/15 (NAS 9)
Shell pressure	depend on shaft seal type

Installation

1 Thread Ports pump 0.03/0.06/0.13cc (clockwise only)

Whin the permitted speed, thread ports pump flow and torque curve is same to cartridge pump.

Thread Ports Piston Pump

2 Thread port pump 0.25/0.5cc (Bi-directional) Thread Ports Piston Pump

For clockwise (face to shaft end), port P1is inlet, P2 is outlet. For CCW on the contrary.

For single direction pump, a small hole can be seen in low pressure port. High pressure will be marked 'P'

3 Thread ports pump 1/1.5cc (Bi-directional)

Thread Ports Piston Pump For clockwise (face to shaft end), port P1 is inlet port, P2 is outlet port. For CCW on the contrary. Case drain port is suggested to locate on the top of the pump.

Hot Tags: thread ports piston pump, China thread ports piston pump manufacturers, suppliers, factory, Bidirectional Plunger Pump MPT, Cartridge Piston Pump, Mini Piston pump, Mini thread piston pump, mp pistion pump, Thread Ports Piston Pump